Sovol SV06 ACE 3D Yazıcı

I am a newbee to 3D printing. I did a lot of research on entry level printers, and was about to order a Bambu A1 when I discovered a review on the SV06 Ace. he reviews were favorable, and the price was very competitive. The sudden price increase on the Bambu made this purchase a no brainier.

I received the printer quickly. Assembly was a breeze- probably less than 15 minutes. It helped to have watched a few Youtube Videos on the process. Startup was also painless.

I selected the lower quality Benchy from the Thumb drive to print as my first test. This was going well until about 2/3 of the way through. at that point, the printer shifted about 3mm to the Port side, and continued all the way to finish in the shifted position. Bed adhesion was very good, as I thought it might have just come loose. I thought the bed cable might have impacted the wall behind the printer, and made the bed shift, so I printed it again. Same exact problem. I was concerned at this point, but a friend who knows #d printing suggested we download and print another item. We downloaded a Whistle from the Web and it printed perfectly. I proceeded to print the flat cable proctective covers, and several other small test prints. All of the prints came out very good. I never expected it to be this easy to get started.

I have had two interactions with customer service so far- one to track down a filament order, and one for a Control box that was damaged in shipment. Both interactions ( Via Email) resulted in replies within less than a day, and with quick resolution. I really appreciated this quick response!

Klipper FW and a Touchscreen
Compatible with Orca Slicer
Wireless connectivity
Perfect first layers
RELIABLE!!

For the money, this is hard to beat.

The best printer by far they make first layer is perfect and it is fast and the prints are great

This is my second printer. I had a cheap artillery genius since 2019 that it was barely functioning. In the plus side I learned a million ways to resolve printer issues.
Got the Ace 2 weeks ago and the difference is unreal to the point I can confidently say you dont need to know anything about printers.
All my print jobs are effortless with the Ace. No need to babysit at all. The ONLY thing I do is that I remove the small bit of material out of the nossle after a print. That is literally it. Hit print from the interface inside Orca Slicer and it will print super fast with really beautiful details.
Only slight con for me is the board fan that it is loud (sound like a hairdryer) but I can absolutely forgive it because the package at this price is unbeatable (also it is an easy mod).
100% recommended if you are using still an older cheap printer, the upgrade is colosal.

The screen glitches even after trying to insulate the harness. The entire harness has been inspected, all connections are secure and all pins are tight within the connectors. The nozzle actually scrapes the bed during prints, even after updating the firmware and doing several calibrations. The machine has only completed one print so far, the others have been stopped due to fan errors. Very disappointing and after sales support is limited to one message every 48-72 hours. Im not sure how much tinkering I am expected to do to make this machine work, but at this point, Im doing their warranty repairs for free.