Sovol SH0 Filament Dryer Active Heating Drying Box
Sovol SH01 Filament Dryer Active Heating Box
Sovol SH01 Filament Dryer Active Drying Box
Sovol Filament Dryer Active Heating Drying Box
Filament Dryer Box Active Heating Drying
Filament Active Heating Dryer Box
Sovol Filament Dryer Box Supports 2 Spools of Filament Drying & Printing - SOVOL
Sovol SH01 Filament Dryer Active Heating Drying Box

Sovol SH01燈絲乾衣機

銷售價格$49.00 USD 正常價格$59.00 USD
節省 $10.00

這 Sovol 長絲乾燥箱 可以用兩個燈絲線軸加熱和列印。它加熱至40-50°C，去除水分並提高列印品質。盒子配有矽膠墊片和蓋子，可緊密密封，保持低濕度。這樣，您就可以在沒有電源的情況下長時間儲存燈絲。觸控螢幕易於使用，清晰顯示溫度、濕度和計時器。

和 由 youtubers 審核。

從: 我們
選項: 燈絲乾衣機

大密封絲幹盒

燈絲乾燥盒內部尺寸：9.29*6.49*9.13 英吋。

Sovol烘乾盒可存放2卷1kg的線軸，出線結構採用矽膠線套和鐵氟龍管，4個孔位可依需求選擇，出線口光滑，不使用時可用插頭蓋住。

加熱和乾燥功能

潮濕的 3D 列印機燈絲會導致張力、堵塞、黏著性差和層移位。此 pla 乾燥盒可保持燈絲乾燥並恢復 3d 印表機燈絲的效能。加熱時請打開盒子頂部的聚四氟乙烯塞，以蒸發水分。

實時監測溫度和濕度

可調溫度範圍40°~ 50°C，設定時間6小時至12小時。 2吋液晶顯示器和觸控按鍵，操作簡便，資訊顯示更加全面清晰。按下電源按鈕啟動，按住功能按鈕（M）變更乾燥時間和溫度設定。

出色的密封儲物箱

矽膠密封使得無需通電即可長時間儲存燈絲，並保護燈絲免受潮濕和污垢的侵害。您可以在乾燥機盒內放入 4 袋乾燥劑（包裝中不包含），以提高乾燥效率和品質。

常問問題

你也可能喜歡

節省 $40.00
Sovol SH02 Filament Dryer Box Smart Temperature Control DryerSovol SH02 3D Printing Filament Dryer Box
Sovol SH02燈絲乾衣機 銷售價格$59.00 USD 正常價格$99.00 USD
節省 $3.00
Sovol PLA 3D Printer Filament 1.75mm 2 Spool 2kgSovol Filament 2kg PLA Filament
Sovol PLA 3D細絲2kg 銷售價格從 $36.99 USD 正常價格$39.99 USD
出售
Sovol Filament Blind Box(10kg/5kg/2kg) - SOVOL
Sovol細絲盲盒10kg/5kg/2kg 銷售價格$119.00 USD 正常價格$239.00 USD
Sovol SV08/T300 3D Printer Hardened Steel 0.4mm Nozzle Kit2Pcs 0.4mm Hardened Steel Nozzle Kit
硬化鋼0.4/0.6mm噴嘴套件，用於SV08/T300 銷售價格$29.99 USD

Customer Reviews

Based on 20 reviews
75%
(15)
25%
(5)
0%
(0)
0%
(0)
0%
(0)
B
Beave
works good just leave it cracked

First time using a dryer, the humidity reading was higher after a 6 hour cycle and it was dripping with humidity inside. Second go, I left it cracked open and it worked good. Instructions should have been more clear about this.

R
RJ
ALMOST 5 STARTS

If it had continuous drying mode option it would have been perfect. I dislike having to reset it after timer runs out.

T
Taylor S.
Nice simple filament dryer

Dryer arrived very fast, and in perfect condition. If anything, they could back off on the packing foam! The small fan does a good job of circulating the air to drive off the moisture. I had to prop open the lid to let the humidity escape, but that's not a huge deal for me. It being relatively sealed makes it feasible to leave spools in long(er) term.

R
Robert Cellucci
Works well, but very noisy

I have one I bought several months ago. So far, it works well, provided you prop the top open with the latches when drying and feeds filament to the printer well. But has been and is extremely noisy due to the fan. It also works well as a feeder for my MMU multi color unit.

M
Mario Seglar Leal

Sovol filament dryer box modification.

123